3/8" Silcon® Silicone Tubing
Manufacturer: New Age Industries
Starting at $24.56
Select a product below and add it to your cart to request a quote.
3/8" Silcon® Silicone Tubing
Description
Features:
- Made from FDA-sanctioned ingredients
- Able to resist extreme temperature variation: -100°F to 500°F (350°F maximum for NSF applications)
- Translucent natural color for visual contact with the flow
- Resilient, stretchable, and resistant to compression set
- Odorless, tasteless, and inert
- Good electrical and weather-ability properties -- resists U.V., ozone, gases, and moisture
- Certified by the National Sanitation Foundation (NSF-51) for food equipment materials
Care is recommended in the selection of fittings and clamps for SILCON as sharp barbs or unlined metal clamps could tear into the wall and possibly cause a failure.
SILCON silicone tubing may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
SILCON is not recommended for implantable or in-body uses or for continuous steam applications.
Applications:
- Appliances
- Beverage
- Computer Manufacture
- Deionized Water Transfer
- Dental
- Duplicating Equipment
- Food
- Gaskets, Seals, & 'O'-Rings
- Hot Water Feeds
- Insulation Sleeves
- Laboratory
- Medical
- Peristaltic Pumps
- Thermal Protection
2802086 | Silcon® Tubing |
---|---|
Working PSI (at 70°F) | 10[T] |
Burst PSI (at 70°F) | 30 |
Brittle Temp | -100°F |
Shore Hardness(±5) | 50A |
Tensile Strength at Break(PSI) | 1100 |
Elongation at Break(%) | 375 |
Footnote | [U] If used in an NSF application, the maximum operating temperature is limited to 350°F. [T] Performed on hydrostatic test equipment at ambient temperature; based on the ASTM D1599 method. |
SKU | Color | Material | Max Temperature | Type | Certification | Outside Diameter |
---|---|---|---|---|---|---|
2802086-100-6.25FT | Natural | Silicone | 500°F | Unreinforced Translucent Silicone Tubing, Peroxide Cured | NSF-51, FDA | .625" (5/8") |
2802086-100-12.5FT | Natural | Silicone | 500°F | Unreinforced Translucent Silicone Tubing, Peroxide Cured | NSF-51, FDA | .625" (5/8") |
2802086-100-25FT | Natural | Silicone | 500°F | Unreinforced Translucent Silicone Tubing, Peroxide Cured | NSF-51, FDA | .625" (5/8") |
2802086-100-50FT | Natural | Silicone | 500°F | Unreinforced Translucent Silicone Tubing, Peroxide Cured | NSF-51, FDA | .625" (5/8") |
2802086-100-100FT | Natural | Silicone | 500°F | Unreinforced Translucent Silicone Tubing, Peroxide Cured | NSF-51, FDA | .625" (5/8") |
2802086-100-400FT | Natural | Silicone | 500°F | Unreinforced Translucent Silicone Tubing, Peroxide Cured | NSF-51, FDA | .625" (5/8") |
-
Autoclaves are widely used to sterilize instruments, glassware and plasticware, solutions and media, and to decontaminate biological wastes.