DN Series Inert Gas High Temperature Ovens
Manufacturer: Yamato Scientific America
The Yamato DN Series Inert Gas Ovens has standard equipment with various operation modes such as program operation and calibration offset function, power failure recovery, and controllable N2 gas flow. In case of the door opening during the operation, the fan and heater will turn off by the door switch.
Description
In Stock!
Lead Times May Vary
The Yamato DN Series Inert Gas Ovens are suitable for temperature test and heat treatment in a non-oxidizing environment, by introducing N2 gas into the chamber.
Performance & Functions:
- Heat resistance test and heat treatment of up to 360°C
- Simple operation by interactive key input
- Standard equipped with various operation modes such as program operation and calibration offset function, power failure recovery mode selection, and user configuration information saving
- Repeatable operation function up to maximum 99 steps, 99 patterns controller with repeat function
- N2 gas flow amount controllable
Safety Functions:
- Enhanced safety counter measure
- Including self-diagnostic functions
- Digital setting
- Independent overheat prevention device and electric leakage breaker
- In case of door opening during operation, fan and heater turn OFF by door switch
Please Note: All 220V Models are not equipped with a power plug. The 220V models include a Rounded Terminal for M4. For more information, please refer to our downloads tab.
| SKU | Controller | Power Requirement | Material |
|---|---|---|---|
| DN-411IE | PID Control by Microprocessor | 220 V/13.5 A/ single phase, No Plug, Round Terminal | Stainless Steel, Cold Rolled Steel Plate |
| DN-611IE | PID Control by Microprocessor | 220 V/19 A/ single phase, No Plug, Round Terminal | Stainless Steel, Cold Rolled Steel Plate |
|
DN Series Specs Sheet | Download |
|
|
Yamato Scientific Electrical Plug (NEMA) Information Sheet | Download |
|
|
Yamato Scientific How to Install 220V Plug | Download |
| SKU | Includes | Width | Depth | Height |
|---|---|---|---|---|
| DN-411IE | 640 mm | 695 mm | 915 mm | |
| DN-611IE | 790 mm | 845 mm | 1065 mm |
The Yamato DN Series Inert Gas Ovens has standard equipment with various operation modes such as program operation and calibration offset function, power failure recovery, and controllable N2 gas flow. In case of the door opening during the operation, the fan and heater will turn off by the door switch.
Starting at $11,875.00
Request A Quote
![DN Series Inert Gas High Temperature Ovens]()
Select a product below and add it to your cart to request a quote.
