Across Int. T40 Cold Trap
Starting at $3,390.00
Select a product below and add it to your cart to request a quote.
Across Int. T40 Cold Trap
The newly re-designed Across International 2nd Gen -40°C/F T40 cold traps now all come UL/CSA certified, standard. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the vacuum cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
- UL 471:2010 and CSA C22.2 certified
- No dry ice or liquid nitrogen needed
- All steel housing for durability
- Small footprint, built-in swivel casters for mobility
- Plug and play, no assembly required
- Digital temperature display in °F
- PT100 sensor
- One year warranty
|Sku||Cooling Capacity||Dimensions||Electrical Information||Flask Size||Max Temperature||Recommended Coolant||Reservoir Capacity||Trap|
|T40-UL.220||@ -10°C: 300W / @-20°C: 250W / @ -30°C: 150W / @-40°C: 50W||13 x 18 x 26 in. (WxDxH)||220V 60Hz 1-PH||-40°F (-40°C)||50% Ethylene glycol + 50% purified water||1.3 gallon (5 liters)||500 mL x 3|
|T40-UL.110||@ -10°C: 300W / @-20°C: 250W / @ -30°C: 150W / @-40°C: 50W||13 x 18 x 26 in. (WxDxH)||110V 60Hz 1-PH||-40°F (-40°C)||50% Ethylene glycol + 50% purified water||1.3 gallon (5 liters)||500 mL x 3|
|Sku||For Use With||Height, in||Inlet/Outlet||Joint Size||OD, in||Receiving Flask Connector||Vacuum Connection|
|CTG-500ml-2P||15 in.||3/8" hose barb||34/45 standard taper||2 in.||-|