Lindberg/Blue M™ Box and Tube Furnace Controllers
Manufacturer: Thermo Fisher
Starting at from $3,850.00 Sale $3,657.50
Select a product below and add it to your cart to request a quote.
Lindberg/Blue M™ Box and Tube Furnace Controllers
Description
Features:
- Fully wired with advanced microprocessor-based digital control, solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone
- Built-in adjustable high-limit overtemperature protection
- LED simultaneously displays actual temperature vs. setpoint in °C or °F
- Designed for operation on 120, 208, or 240V 50/60Hz, single-phase line
Overtemperature Control:
- Adjustable digital control is factory installed
- Protects furnace and load in the event of primary control circuit failure
- Overrides main controller and shuts off power to furnace if high limit is reached
- Must be manually reset for safety
- Operates via magnetic contacts through a signal from an independent thermocouple
1200°C Three Zone, 16 Segment, One Programmable Controller for Split-hinge Furnaces (CC58434C):
- Three microprocessor-based PID controls, single segment, single setpoint, one ramp to set point
1200°C Three Zone, 16 Segment, Three Programmable Controllers for Split-hinge Furnaces (CC58434PC):
- Center Zone—One microprocessor-based PID programmable control, with one program of 16 segments for ramps (up and down) and eight dwells (timed holds)
- End Zones—Two microprocessor-based PID control, single segment, single setpoint; microprocessors mimic the programmed profile of the center zone controller, but allow a digitally displayed offset up to 100°C
1200°C Digital, Single Setpoint Controllers for Split-hinge Furnaces (CC58114PBA, CC58114PA):
- Includes one microprocessor-based PID control, single segment, single setpoint, one ramp to setpoint CC58114PBA includes overtemperature control
1500°C Digital, Single Setpoint Controller for Box Furnaces (CC58125C):
- Includes three microprocessor-based PID controls, single segment, single setpoint, one ramp to set point
1500°C Digital, Single Program, Multiple Segment Programmable Controllers for Box Furnaces (CC58125PC, CC58125PBC):
- Advanced microprocessor-based PID control, single program with multiple segments for ramp and dwell temperature control
- CC58125PBC includes overtemperature control
SKU | Amps | For Use With | Hertz | Temperature Range | Display |
---|---|---|---|---|---|
CC58114PBA-1 | 30 A | Lindberg/Blue M 1200 | 50/60 Hz | 1200°C (Split-Hinge), 1500°C (Box Furnaces) | Digital |
CC584343PBC-1 | 20 A | Lindberg/Blue M 1200 | 50/60 Hz | 1200°C (Split-Hinge), 1500°C (Box Furnaces) | Digital |
CC58114PBC-1 | 30 A | Lindberg/Blue M 1200 | 50/60 Hz | 1200°C (Split-Hinge), 1500°C (Box Furnaces) | Digital |
CC58434BC-1 | 20 A | Lindberg/Blue M 1200 | 50/60 Hz | 1200°C (Split-Hinge), 1500°C (Box Furnaces) | Digital |
CC58114A-1 | 30 A | Lindberg/Blue M 1200 | 50/60 Hz | 1200°C (Split-Hinge), 1500°C (Box Furnaces) | Digital |
CC58114C-1 | 30 A | Lindberg/Blue M 1200 | 50/60 Hz | 1200°C (Split-Hinge), 1500°C (Box Furnaces) | Digital |