4-Ports Okuda Vacuum/Inert Lines, Airfree, Schlenk
Manufacturer: Chemglass
Starting at $4,759.20
Select a product below and add it to your cart to request a quote.
4-Ports Okuda Vacuum/Inert Lines, Airfree, Schlenk
Description
Chemglass 4-Ports Okuda Vacuum/Inert Lines, Airfree, Schlenk
Features:
- Main vacuum line with four 24/40 inner ports
- 0-4mm Chem-Vac Chem-Cap® valves
- Valves are sealed to either the vacuum or inert gas side of the manifold and then bent to a 90° angle
- Strong and compact assembly
- Permits the line to be set up with the trap assembly on either the right or left side
- Port spacing is 170mm center to center
- Cleanout at the end of the vacuum line has a #25 o-ring joint and is supplied complete with a cap style stopper
- Valved gauging port is placed on the main vacuum line and has a 18/9 ball joint
- Inert gas line has a port for connection to a bubbler or inert gas source and has a 18/9 ball joint
- Valved, cross-over line is used for evacuation of the entire system
- End cleanouts on the inert gas line have a #9 o-ring joint and are supplied complete with a cap style stopper
- Manifold is connected to the dual trap assembly via a 35/20 ball joint with a 0-12mm Chem-Vac™ Chem-Cap® shutoff valve to isolate the line from the traps
- Pre-trap (H) is 50 mm OD x 205 mm in length and has two 35/20 socket joints to connect it to the manifold and main trap
- Main trap assembly has two 0-12 mm Chem-Vac™ Chem-Cap® valves which permits the trap to be totally isolated from vacuum for cleaning
- Valved gauging port placed between the main and pre-trap having a 18/9 ball joint
- Main trap has a lower body 45 mm OD x 210 mm in length with a 40 mm o-ring joint Connection to vacuum source is 22 mm outer diameter for use with heavy wall rubber vacuum tubing
Includes:
- #18 S.S. pinch clamps (2)
- #35 S.S. pinch clamps (3)
- #65 S.S. pinch clamps (1)
- #112 Viton o-rings (2)
- #226 Viton o-ring (1)