ENDURO™ POWER SUPPLY 250V & 300V
The ENDURO™ Power Supplies are ideal for DNA, RNA and protein electrophoresis as well as blotting. They provide a high degree of sophistication and versatility yet are extremely easy to use. Three models are available to meet a variety of needs. They all provide dependable performance with simple programming and are certified to IEC-61010-1 the international safety standard. This ensures the highest level of safety and protection.
The ENDURO™ 300V Power Supply is ideal for general laboratory use especially for horizontal gel electrophoresis and mini-vertical PAGE gels. This high value power supply provides operating choices that include constant voltage or constant amperage with automatic crossover, no load detection, sudden load change and over voltage protection. It comes with a timer and allows for timed or continuous operation. All operating parameters are set using the membrane keypad and displayed digitally on the backlit LCD. Safety features are incorporated into the power supply systems. The units can also be programmed to restart in the event of a power disruption. This comes with to run up to 4 gel tanks simultaneously.
The ENDURO™ 250V is a high current programmable power supply ideal for all blotting applications, horizontal gel electrophoresis and many vertical protein applications where programming is necessary. It features a voltage range from 5 to 250V in 1V increments. Current is adjustable in 0.01A steps to a maximum of 3A. Wattage is adjustable in 1W steps up to 300W. This comes with outputs for up to 4 sets of leads.
ENDURO™ POWER SUPPLY MINI
The ENDURO™ Mini is a great saver of space and money. This power supply can handle up to 2 gel boxes at a time and is great for Horizontal DNA gels and Mini-Vertical Protein gels. These are small in size but not performance. They are stackable but when combined with the PowerStack rack they can be efficiently stacked allowing optimal air circulation while only utilizing one power outlet at the lab bench. These units are full featured with 300V, 400mA, 60W and a timer built-in. They can run at either constant voltage or constant current and have automatic cross-over as well as no-load detection.
||Enduro Model 300V
||Enduro Model 250V
||Enduro Mini 300V
|Output voltage range / increments
||2-300V / 1V
||5-250V / 1V
||10 - 300V / 1V
|Output current range / increments
||4-500 mA / 1 mA
||10-3000 mA / 10 mA
||10 - 400mA / 1mA
||90 watts max. / na
||1-300 W / 1V
|Operating constant modes
||Voltage or current
||Voltage, current, or power
||Constant voltage or constant current
||1-999 minutes or continuous
||1-99h 59 minutes or continuous
||1-999 minutes with alarm, continuous
||10 steps/program / 20 program memory
|Dimensions (W xD x H)
||19 x 25 x 8 cm
||19 x 25 x 8 cm
||140 x 191 x 84mm
||100 - 240V