Ferric Chloride Solution (100 g in 40 mL Water)
Manufacturer: LabChem Inc.
Ferric Chloride Solution (100g in 40mL Water) from LabChem Inc. is an ultra-concentrated, precision-engineered reagent designed for the most demanding analytical procedures. This specific mass-to-volume ratio provides the high molarity required for Sulfide Precipitation and specialized environmental water testing. By utilizing this pre-formulated, high-density solution, laboratories ensure stoichiometric consistency and avoid the hazards and inaccuracies associated with manually dissolving large quantities of hygroscopic ferric chloride crystals.
Description
In Stock!
Lead Times May Vary.
Features:
- Optimized for Sulfide Testing: Specifically formulated to react instantaneously with sulfide ions, making it an essential component for EPA-approved precipitation and determination methods
- Superior Reactive Efficiency: The high-density formulation allows for minimal volumetric addition to samples while providing a massive excess of ferric ions for complete precipitation
- Method Compliance: Ensures municipal and industrial wastewater laboratories meet the rigorous requirements for regulated water quality monitoring
- Eliminates Manual Prep: Safely provides a near-saturated solution, preventing the extreme heat generation (exothermic reaction) and corrosive dust exposure common during manual mixing
Safety & Regulatory Information:
DANGER! Highly Corrosive & Oxidizing: This is an extremely concentrated acidic solution. It causes severe skin burns and permanent eye damage upon contact. It may intensify fire when in contact with combustible materials.
- Personal Protection: Wear acid-resistant gloves (Nitrile or Viton), chemical splash goggles, and a protective lab coat. Use exclusively in a certified laboratory fume hood.
- Storage: Store in a dedicated corrosives safety cabinet. Keep the container tightly closed and away from strong bases, alkali metals, and organic materials.
- Handling: This solution is highly viscous and dense. Handle with care to avoid splashing. If dilution is required, always add the solution slowly to water.
| Chemical CAS Number | 10025-77-1 |
|---|---|
| Chemical DOT Description | FERRIC CHLORIDE SOLUTION |
| Chemical Hazard Class | 8 |
| Chemical Packaging Group | P.G.III |
| Hazard Symbol 1 |
|
|
Ferric Chloride Solution (100g in 40mL water), for Sulfide Safety Data Sheet (SDS) | Download |
Ferric Chloride Solution (100g in 40mL Water) from LabChem Inc. is an ultra-concentrated, precision-engineered reagent designed for the most demanding analytical procedures. This specific mass-to-volume ratio provides the high molarity required for Sulfide Precipitation and specialized environmental water testing. By utilizing this pre-formulated, high-density solution, laboratories ensure stoichiometric consistency and avoid the hazards and inaccuracies associated with manually dissolving large quantities of hygroscopic ferric chloride crystals.
Starting at $84.60
Request A Quote
![Ferric Chloride Solution (100 g in 40 mL Water)]()
Select a product below and add it to your cart to request a quote.
