Fluoride Standard (10 ppm)
Manufacturer: LabChem Inc.
Fluoride Standard, 10 ppm from LabChem Inc. is a precision-manufactured calibration reagent used for the quantitative determination of fluoride ions in aqueous samples. With a certified concentration of 10 mg/L (1 mL = 0.01 mg F), this standard is ideal for mid-range calibration curves in drinking water analysis and industrial effluent monitoring. It is a critical component for labs utilizing Ion Selective Electrodes (ISE) or Ion Chromatography (IC) to maintain regulatory compliance.
Description
Features:
- Calibration Consistency: Manufactured under strict quality protocols to provide a standardized chemical composition, ensuring reproducible results across different laboratory batches.
- Traceable Accuracy: Prepared with high-purity raw materials and ultra-pure water, designed to align with NIST-traceable standards for laboratory accreditation and audit readiness.
- Laboratory Ready: This stabilized aqueous solution is optimized for immediate use in environmental, industrial, and research workflows.
- Stabilized Matrix: Formulated to maintain ionic stability over its shelf life, preventing the degradation or loss of fluoride ions that can occur in non-stabilized solutions.
Safety & Regulatory Information:
WARNING! Chemical Hazard: May cause irritation if improperly handled.
- Personal Protection: Wear chemical-resistant nitrile gloves, safety splash goggles, and a lab coat. Use in a well-ventilated laboratory environment.
- Storage: Store at controlled room temperature (15°C to 30°C) in the original polyethylene container.
- Important Storage Note: Avoid storage in glass. Fluoride ions react with the silica in glass, which can etch the container and significantly alter the concentration of the standard over time.
- Application Tip: For ISE measurements, ensure a 1:1 ratio of sample/standard to TISAB (Total Ionic Strength Adjustment Buffer) to mask potential interferences from aluminum or iron ions.
| Chemical CAS Number | 7681-49-4 |
|---|
|
Fluoride Standard, 10 ppm Safety Data Sheet (SDS) | Download |
Fluoride Standard, 10 ppm from LabChem Inc. is a precision-manufactured calibration reagent used for the quantitative determination of fluoride ions in aqueous samples. With a certified concentration of 10 mg/L (1 mL = 0.01 mg F), this standard is ideal for mid-range calibration curves in drinking water analysis and industrial effluent monitoring. It is a critical component for labs utilizing Ion Selective Electrodes (ISE) or Ion Chromatography (IC) to maintain regulatory compliance.
Starting at $64.90
Request A Quote
![Fluoride Standard (10 ppm)]()
Select a product below and add it to your cart to request a quote.
