FastPette™ Pipet Controllers

The revolutionary battery-powered pipet controllers work with glass and plastic pipets in the 0.5 to 100 mL range. The FastPette™ V2 and Pro were designed with the user in mind. Conveniently positioned switches allow choosing different operation modes and speeds depending on the volume of the serological pipet and liquid viscosity. Additionally, aspirating and dispensing speed is controlled through two comfortable finger triggers.

Features:

• Works with pipets from 0.5 to 100 mL
• High aspiration speed – 25 mL in 4 seconds
• Cordless work for up to 8 continuous hours
• Easy access to battery compartment
• Conveniently placed triggers control speed and mouse
• Autoclavable pipet holder
• LCD display (FastPette™ Pro)
• Ergonomically designed

For the FastPette™ V2, the aspiration speed can be set to high or low to adjust for the volume of the pipet and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipet with a blow out step. The FastPette™ V2 is protected from the entrance of liquids by both a PTFE filter and a safety valve. To protect samples from cross contamination, both the filter and pipet holder are easily exchanged and autoclaved. When fully charged, the FastPette™ V2 can be used continuously for eight hours. When the low battery light is lit, the unit should be recharged. Should the charge run out while working with the pipet controller, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. The FastPette™ V2 is supplied with a universal power supply (US, EU, UK, and AU), wall hanger, bench stand, and 0.2 µm PFTE filter.

When the FastPette™ Pro is fully charged, the NiMH batteries enable up to eight hours of continuous use. The Large LCD display indicates the battery status along with the pipetting mode and speed selected. In order to protect the device against overfilling, the FastPette™ Pro is equipped with a 0.2 µm PTFE filter. The filter, the pipet holder and the nosepiece are autoclavable. The FastPette™ Pro is also supplied with a universal power supply (US, EU, UK, and AU), an additional autoclavable 0.2 um filter, and a two-position charging stand.

Includes:

• 0.2 µm Filter
• Wall Hanger
• Bench Stand (FastPette™ V2)
• Two-Position Charging Stand (FastPette™ Pro)
• Universal Power Supply

A Quality Control Certificate is included for both P2000 and P2002 for manufacturing plant standards and product quality requirements.