SCI-Pet Manual Pipette Fillers

Features:

• Intuitive Speed Control: The spring-loaded thumb lever allows for variable speed control—press lightly for drop-by-drop precision or fully for rapid filling and dispensing
• Integrated Blow-out: A dedicated central button allows for a manual "blow-out," ensuring that the last remaining drops of liquid are expelled for "To Deliver" (TD) graduated pipettes
• Contamination Protection: Equipped with a 3µm hydrophobic filter, the internal mechanism is protected from accidental over-aspiration and aerosol contamination
• Universal Compatibility: The tapered silicone holder creates an airtight seal with a wide variety of pipette neck diameters (1 mL to 100 mL)
• Autoclavable Components: The silicone pipette holder can be removed and autoclaved to ensure a sterile interface with your samples

Basic Operation:

1. Squeeze the large suction bulb to create a vacuum
2. Move the thumb lever up to aspirate and down to dispense
3. Use the central button for a gravity-assisted blow-out

Operation & Maintenance Guidelines:

• Filter Replacement: If you notice a significant decrease in aspiration speed or if liquid is accidentally drawn into the head, replace the 3µm filter immediately to prevent damage to the internal seals.
• Cleaning: The exterior body can be cleaned with 70% Isopropanol or mild detergent. Do not autoclave the entire unit; only the silicone holder is designed for steam sterilization.