Barnstead™ LabTower™ RO Water Purification System

Advanced technology in a mobile design:

• An ultra-modern microprocessor control provides easy-to-read system parameters.
• Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
• Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
• System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
• A built-in pretreatment unit ? consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5?m combi-cartridge ? protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages.

Compact and mobile design:

• System includes three system options with permeate flows of 20, 40 or 60L/hr.
• Stand-alone design with integrated 100L tank takes up ZERO bench space?casters allow for easy relocation.
• Systems can be upgraded later to accommodate growing water capacity demands.

Integrated 100L reservoir

• System stores 100L of RO water in a high-purity polyethylene PE opaque reservoir.
• Adjustable reservoir volume can be programmed for times of low demand?dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Easy-to-operate clear display:

• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
• Status of current operating mode clearly indicating ?production?, ?stand-by?, ?cleaning? or ?disinfection? modes.
• Reservoir fill-level is shown as a percent.
• System parameters are code-protected to prevent accidental changes to set points.

GLP-compliant documentation:

• LabTower RO has been developed to fulfill GLP requirements.
• Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer.
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm-1.

Pretreatment:

• External Pretreatment required