0.01 Micron, PCTE Membrane Filters
Manufacturer: Sterlitech Corporation
Polycarbonate Track Etch Membrane Disc Filters exhibit superior strength, low protein binding, low extractables, controlled pores, and a smooth surface, allowing for rapid cell migration and microbial growth for reduced incubation times. Choose the best filter for your lab!
Description
In Stock!
Lead Times May Vary.
Polycarbonate Track Etch (PCTE) membranes are made from a thin, microporous polycarbonate film material. It is ideally suited for use in blood assays and high-purity and general filtration.
| SKU | Material | Max Temperature | Pore Size | Retention |
|---|---|---|---|---|
| PCT00113100 | Polycarbonate (PCTE) | 140°C | 0.01 | 0.01µm |
| PCT00114220 | Polycarbonate (PCTE) | 140°C | 0.01 | 0.01µm |
| PCT00120030 | Polycarbonate (PCTE) | 140°C | 0.01 | 0.01µm |
| PCT00125100 | Polycarbonate (PCTE) | 140°C | 0.01 | 0.01µm |
| PCT00147100 | Polycarbonate (PCTE) | 140°C | 0.01 | 0.01µm |
| SKU | pH Range | Burst Strength | Flow Rate | Air Flow Rate | Sterilization | Country of Manufacture |
|---|---|---|---|---|---|---|
| PCT00113100 | 4 to 8 | 10 psi | 0.1mL/min/cm2 | 0.0075 L/min/cm2 | Gamma Irradiation, EtO | United States |
| PCT00114220 | 4 to 8 | 10 psi | 0.1mL/min/cm2 | 0.0075 L/min/cm3 | Gamma Irradiation, EtO | United States |
| PCT00120030 | 4 to 8 | 10 psi | 0.1mL/min/cm2 | 0.0075 L/min/cm4 | Gamma Irradiation, EtO | United States |
| PCT00125100 | 4 to 8 | 10 psi | 0.1mL/min/cm2 | 0.0075 L/min/cm5 | Gamma Irradiation, EtO | United States |
| PCT00147100 | 4 to 8 | 10 psi | 0.1mL/min/cm2 | 0.0075 L/min/cm6 | Gamma Irradiation, EtO | United States |
Polycarbonate Track Etch Membrane Disc Filters exhibit superior strength, low protein binding, low extractables, controlled pores, and a smooth surface, allowing for rapid cell migration and microbial growth for reduced incubation times. Choose the best filter for your lab!
Starting at $174.73
Request A Quote
![0.01 Micron, PCTE Membrane Filters]()
Select a product below and add it to your cart to request a quote.
