2.0 Micron, PCTE Membrane Filters
Manufacturer: Sterlitech Corporation
A single, integral, microporous polycarbonate film is used to produce the membranes and provide them with their thin, translucent, structure and the glass-like surface characteristics that enable superior particle visibility and easy microscopic analysis. This perfectly manufactured filters are only the best for your lab!
Description
In Stock!
Lead Times May Vary.
Polycarbonate Track Etch (PCTE) membranes are made from a thin, microporous polycarbonate film material. It is ideally suited for use in blood assays and high-purity and general filtration.
| SKU | Material | Retention | Pore Size | Thickness | Pore Density | Max Temperature |
|---|---|---|---|---|---|---|
| PCT2013100 | Polycarbonate (PCTE) | 2µm | 2 | 10 µm | 2 x106 | 140°C |
| PCT2014220 | Polycarbonate (PCTE) | 2µm | 2 | 10 µm | 2 x106 | 140°C |
| PCT2020030 | Polycarbonate (PCTE) | 2µm | 2 | 10 µm | 2 x106 | 140°C |
| PCT2025100 | Polycarbonate (PCTE) | 2µm | 2 | 10 µm | 2 x106 | 140°C |
| PCT2047100 | Polycarbonate (PCTE) | 2µm | 2 | 10 µm | 2 x106 | 140°C |
| PCT209030 | Polycarbonate (PCTE) | 2µm | 2 | 10 µm | 2 x106 | 140°C |
| SKU | Protein Binding | pH Range | Bubble Point | Burst Strength | Flow Rate | Air Flow Rate | Sterilization | Country of Manufacture |
|---|---|---|---|---|---|---|---|---|
| PCT2013100 | ~5 µm/cm2 | 4 to 8 | 3 psi | 10 psi | 300 mL/min/cm2 | 16.50 L/min/cm55 | Gamma Irradiation, EtO | United States |
| PCT2014220 | ~5 µm/cm2 | 4 to 8 | 3 psi | 10 psi | 300 mL/min/cm2 | 16.50 L/min/cm56 | Gamma Irradiation, EtO | United States |
| PCT2020030 | ~5 µm/cm2 | 4 to 8 | 3 psi | 10 psi | 300 mL/min/cm2 | 16.50 L/min/cm57 | Gamma Irradiation, EtO | United States |
| PCT2025100 | ~5 µm/cm2 | 4 to 8 | 3 psi | 10 psi | 300 mL/min/cm2 | 16.50 L/min/cm58 | Gamma Irradiation, EtO | United States |
| PCT2047100 | ~5 µm/cm2 | 4 to 8 | 3 psi | 10 psi | 300 mL/min/cm2 | 16.50 L/min/cm60 | Gamma Irradiation, EtO | United States |
| PCT209030 | ~5 µm/cm2 | 4 to 8 | 3 psi | 10 psi | 300 mL/min/cm2 | 16.50 L/min/cm61 | Gamma Irradiation, EtO | United States |
A single, integral, microporous polycarbonate film is used to produce the membranes and provide them with their thin, translucent, structure and the glass-like surface characteristics that enable superior particle visibility and easy microscopic analysis. This perfectly manufactured filters are only the best for your lab!
Starting at $96.24
Request A Quote
![2.0 Micron, PCTE Membrane Filters]()
Select a product below and add it to your cart to request a quote.
