Protector Work Station
Manufacturer: Labconco
Starting at $8,045.00
Select a product below and add it to your cart to request a quote.
Protector Work Station
Description
Work surface and base are required and sold separately.
Protector Work Stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator. Ideal for cramped or crowded labs, Protector Work Stations have a low profile so they fit easily under standard upper cabinets.
Protector Work Stations designed for ducting to the outside are available with or without a built-in blower. If there is no feasible way to vent to the outside, models with a built-in blower are available that use specially-treated Carbon Filters. These filter packs keep low level concentrations of toluene, xylene, formalin, formaldehyde and other solvents below their OSHA-recommended, time-weighted averages, restoring clean air to the laboratory. Receive a technical analysis of the right product for your application with our Chemical Assessment form. One year warranty.
Compliance
• SEFA 1-2002
• Modified ASHRAE 110-1995
• ANSI Z9.5-1993
• UL 3101-1/61010-1 (115-volt models)
• CAN/CSA C22.2 No. 1010.1 (115-volt models)
• CE Conformity marking (230-volt models)
Features
• Face velocities from 60 to 100 fpm
• Built-in dynamically-balanced motorized impeller
• Speed control to achieve desired inflow velocity
• Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
• Upper dilution air supply
• Zone-perforated Type 304 stainless steel rear baffle
• Side-entry air foils
• Glacier white and gray, dry powder epoxy-coated aluminum frame and steel rear plenum and baffle
• 1/4" thick tempered safety glass front sash and sides
• 8" high sash opening
• Ergonomic 20° angled and hinged sash with wiping seals and spring-loaded latch that pivots upward and locks to a 20" height
• Glare-free fluorescent lighting
• Light and blower switches
• Exterior rear-mounted electrical receptacle
• Baffle with two release knobs that pivots down for filter access
• Low discharge volume and quiet operation