The HST30 lets you maintain stirring speed with a 1/4 hp, totally enclosed, permanent-magnet DC motor. Digital readout displays speed in rpm's and torque in oz-in. Front panel switch toggles between speed and torque.
· Actual speeds are displayed and maintained by a synthetic tachogenerator. (Speed is kept within less than 1% of the base speed from no-load to more than 100% of full-load regardless of AC line voltage fluctuations of ±10%.)
· Viscosity measurement is easier thanks ... Read more
The HST30 lets you maintain stirring speed with a 1/4 hp, totally enclosed, permanent-magnet DC motor. Digital readout displays speed in rpm's and torque in oz-in. Front panel switch toggles between speed and torque.
· Actual speeds are displayed and maintained by a synthetic tachogenerator. (Speed is kept within less than 1% of the base speed from no-load to more than 100% of full-load regardless of AC line voltage fluctuations of ±10%.)
· Viscosity measurement is easier thanks ... Read more
The HST30 lets you maintain stirring speed with a 1/4 hp, totally enclosed, permanent-magnet DC motor. Digital readout displays speed in rpm's and torque in oz-in. Front panel switch toggles between speed and torque.
· Actual speeds are displayed and maintained by a synthetic tachogenerator. (Speed is kept within less than 1% of the base speed from no-load to more than 100% of full-load regardless of AC line voltage fluctuations of ±10%.)
· Viscosity measurement is easier thanks to a controller with a digital readout switch able between speed and torque.
· Data on shear stress, shear rate, velocity gradients, and viscosity is accumulated easily with external DC multi-volt signals for speed and torque (for strip or X-Y recorders) available through an output port on the rear of the control.
· Operator convenience and safety is increased with cord connections between drive motors and controls to allow control placement away from hostile environments.
Specifications: The HST30 includes a reversible drive motor with mounting bracket, controller, and the following accessories:
· 099D A260108 - 3-jaw, keyless chuck and arbor for HST30N and HST230N only
· 099D A260275 - 3-jaw, keyless chuck and arbor (for HST30 geared motors)
· 099D A260106 - propeller
· 100D LC300 - heavy-duty 90° clamp
· Lab stand 099D A130150 is recommended to mount the HST30.
Lab bench case: 8"w x 8"d x 4.75"h Motor bracket: 4.5"w x 4.5"d x 9.5"h, with 8.5" rod Finish: Foxtip gray and charcoal
We have received your request and are working hard on your quotation. Please allow 24 - 48 business hours for quote processing. You will receive a copy of your request to the email attached.
We look forward to serving you.
Thank you!
We have received your request and are working hard on your quotation. Please allow 24 - 48 business hours for quote processing. You will receive a copy of your request to the email attached.
We look forward to serving you.
The Lab Depot uses cookies to improve your experience on our site. By clicking “Dismiss”, you consent to the use of all cookies which enable you to have a more personalized shopping experience. The Lab Depot does not sell any personal information. For more information, please read our privacy policy.